Dicor 12″ X 25′ EPDM Rubber Roof Repair Membranes

For use on: EPDM, rubber, TPO, metal and fiberglass

The rubber roof repair membrane resists tearing and abrasion, is tolerant of temperature extremes, displays superior water resistance and is highly resistant to deterioration. Plus, it contains no asphalt, solvent of VOCs, making it environmentally friendly.

Directions for use:
1. Clean area with Dicor Rubber Roof Cleaner.
2. Measure damaged area and cut membrane at least 2 inches larger than the damaged area on all sides.
3. Remove clear protective layer and place membrane over damaged area.

Note: Do not try to cover large areas by butting 533RM-6 or 533RM-12 end-to-end or side-to-side (butt joints).

4. With small roller, apply pressure to flatten and make as smooth as possible.
5. Remove beige protective layer and place a bead of Dicor Lap Sealant around edge.