Dicor Tufflex™ PVC Water Based Acrylic Bonding Adhesive – 1 Gallon

Water-based acrylic adhesive is environmentally friendly and user safe. Special formula gives you more open time for installation, and many re-tack opportunities. Provides excellent coverage and is easy to apply. Use on moisture absorbent substrates, NOT on metal, fiberglass or membrane to membrane applications.

The water based bonding agent is part of Dicor’s three-part roofing system that includes the roofing membrane, bonding adhesive and lap sealant.

Dicor has secured the best combination of products to make installation of a new roof covering as easy and reliable as possible, thereby enhancing RV enjoyment. Each component in the kit is formulated, tested and proven in the field to create an excellent bond.

INSTALLATION INFORMATION

This material is to be used on porous substrates only. Stir thoroughly before use and keep covered when not in use.

Surface Preparation: Clean, dry surfaces are required for optimum bond strength.

Application Methods: Apply adhesive evenly at a rate of one gallon for every 160-180 square feet to the substance by short nap roller.

Bonding: Mate the surfaces with only enough pressure, evenly applied, to insure good contact between the substrates. Excessive pressure can redistribute the adhesive in an uneven manner.

Empty containers: When “empty” this package may contain harmful vapor and residue. Do not reuse container or remove labels. Follow label warning even “empty”. Disposal should be in accordance with applicable regulations.

MANUFACTURER DISCLAIMER

This product is NOT intended for seaming rubber to rubber or adhering rubber to metal, fiberglass or plastic surfaces.
User determines suitability for intended use and assumes all risk and liability.

Caution: For Industrial Use Only. Use cautionary information carefully. Keep out of reach of children.

Contains no hazardous ingredients per OSHA 1910.1200.

Precautions: Vapors are heavier than air. Prevent build-up of vapors. Open all windows and doors. Use only with cross ventilation. Avoid prolonged exposure to the vapors.
Skin: This product may cause skin irritation upon repeated contact.
Eyes: If splashed into eyes, may cause irritation. Untreated, may cause caustic burns.
Inhalation: Overexposure to high vapor concentration in poorly ventilated areas may cause headaches, nausea and irritation to the nose and throat.
Skin: Wash with soap and water. If irritation persists, get medical attention.
Eyes: Flush eyes with clean water for 15 minutes. Get medical attention.
Inhalation: Remove to fresh air. If not breathing, administer CPR. Get medical attention.
Ingestion: Induce vomiting by giving syrup of Ipecac or by touching finger to back of throat.
In case of fire or spill: Wear self-contained breathing apparatus. Ventilate area and absorb with absorbant material.